Operating instructions

SoftCare Evo - Type SE10 9-85
Quit card creation
Chapter 9 - Operating units
)
Press the button <<Cancel>> when no further
cards should be created with the same data.
)
Press the button <<OK>> to create further
cards of the same type with other data (e.g.
another program).
⇒ The display shows:
** XXX-Card **
050 Create cards active
Request for action
)
Proceed with the steps as described above.
)
Select another card type by using the buttons
<<¨>> and <<§>>.
)
Press the button <<OK>> to acknowledge the
selection.
⇒ The display shows the selected card type.
)
Press the button <<P>>.
⇒ The LED in the lower right corner is illumi-
nated.
)
Press the button <<Cancel>>.
⇒ The display shows:
05> Create card