Operating instructions

SoftCare Evo - Type SE10 10-3
Operation
Maintenance
Chapter 10 - Special equipment
Work through the following steps when the water
tank has been emptied:
)
Open the bleeder valve on the pump.
)
Fill the water tank with water.
)
Close the bleeder valve again.
⇒ The system is now ready for operation again.
Weekly
)
Check that the level regulation functions cor-
rectly.
Monthly
)
Check the dirt traps in the supply hoses and
clean the filter if necessary.
Every six months
We recommend an inspection and maintenance by
WashTec Service at six-monthly intervals.