Operating instructions

SoftCare Evo - Type SE10 10-10
Winter operation mode
Procedure 1
Procedure 2
Chapter 10 - Special equipment
Entrance and exit door are closed in winter operation
mode.
Two procedures are possible:
⇒ The entrance door opens with program start.
⇒ The entrance door is closed with start of a
wash program by pressing the start button.
⇒ Entrance and exit door open with the end of
the wash program (depending on the setting).
⇒ Entrance and exit door are closed when the
vehicle has left the wash building (depending
on the setting).
⇒ The entrance door opens when the "Door
open" button is pressed or when the induction
loops detect a vehicle in front of the car wash
building.
⇒ The entrance door is closed with start of a
wash program by inserting the wash card.
⇒ Entrance and exit door open with the end of
the wash program (depending on the setting).
⇒ Entrance and exit door are closed when the
vehicle has left the wash building (depending
on the setting).