Operating instructions

SoftCare Evo - Type SE10 3-13
Safety shutdown
front side
:
Chapter 3 - Structure and function
Insufficient safety distances may cause severe
accidents.
Systems where the safety distance does not
comply with local regulations may not be oper-
ated without safety shutdowns.
In case the system has been modified afterwards
in a way that the safety distance does not comply
anymore with local regulations (i.e. installation of
a heater, a wash basin, etc.) the wash system has
to be refitted with a safety shutdown.
The safety shutdown feature is used in short or nar-
row buildings in which the safety distance specified
by the valid, applicable local regulations cannot be
maintained.
The safety shutdown feature at the front side con-
sists of a door mounted on moving bearings and a
proximity switch which is located in the lower side
element. The system shuts down as soon as pres-
sure is applied to the door.
Fig. 3-13: Safety shutdown - front side