Operating instructions

SoftCare Evo - Type SE10 3-28
Microprocessor control
Circuit breakers
Motor protection
switches
Chapter 3 - Structure and function
When the control cabinet door is opened, there is
a risk of electrical shock injury when the system
is switched on.
Switch the power off at the main switch before
you open the control cabinet door.
If the door must be opened with the system
switched on in order to carry out certain mainte-
nance, testing and adjusting work observe the
following information:
 This may only be done by authorized, quali-
fied and fully instructed personnel who have
received instruction from WashTec Service
about potential dangers.
 Do not touch any hazardous components and
only carry out the work described in this op-
erating manual.
The microprocessor control system is the central in-
telligence unit of the roll-over car wash system. It
controls all devices according to the selected wash
program.
Circuit breakers may be switched on again after a
malfunction.
The motor protection switches have an integrated
fuse, which can be reinserted after failure.