Operating instructions

SoftCare Evo - Type SE10 4-5
Safety devices
Moving the wash gantry
Check emergency-off
function
Chapter 4 – Commissioning/dismantling/ conversion/
transport/assembly
A fault in the safety devices (emergency-off func-
tion, safety shut-down and safety switches) can
cause serious accidents and/or damage to vehi-
cles.
For this reason, all safety devices must be
checked every day to ensure that they function
correctly. If any safety device is faulty, please
inform WashTec Service immediately. On no ac-
count may the roll-over car wash system be put
into operation.
We recommend to each operating company that
the performed tests with the test result as well as
name, date and signature of the testing person
should be documented in written form.
Proceed with the following steps to check the safety
devices:
The test result of a function test is always displayed
on the operating unit. Therefore it is recommended to
move the wash gantry close to the operating unit to
easily read off the test result. Use the manual control
buttons as described in chapter 9.5. for moving the
wash gantry.
)
Press the emergency-off button.
⇒ The display in the operating unit shows
„Emergency Off“
)
Release the emergency-off button.
)
Acknowledge the message.