Operating instructions

SoftCare Evo - Type SE10 4-6
Checking safety switch
on side brushes
Checking the
safety shutdown
Chapter 4 – Commissioning/dismantling/ conversion/
transport/assembly
)
Push one of the side brushes strongly back-
ward.
⇒ The display in the operating unit shows
„Safety strip actuated“.
⇒ The message remains in the display after
releasing the side brush.
)
Acknowledge the message.
)
Repeat the above steps for the other side
brush.
If your roll-over car wash system is fitted with addi-
tional safety shutdown features, these must be
checked before the system is started up.
)
Press strongly against one of the cabinet
doors.
⇒ The display in the operating unit shows
„Emergency stop actuated internally“.
⇒ The message remains in the display after
releasing the door.
)
Acknowledge the message.
)
Repeat the above steps for the other door.