Operating instructions

SoftCare Evo - Type SE10 5-6
Operation mode 2
Chapter 5 - Washing operation
Automatic start is switched off, the entrance door is
closed and the driver waits outside of the wash build-
ing.
)
Select a wash program (by card or by input at
the operating unit).
⇒ The entrance door opens
)
Drive the vehicle forward into the wash system
so that there is enough space on each side.
)
Position the vehicle correctly
⇒ The traffic light shows “Stop”.
)
Turn off the engine, put the car in PARK (for a
standard car put the car in 1st gear) and apply
the parking brake.
)
Close windows, leave the vehicle and lock all
vehicle doors (including trunk or tailgate).
)
Leave the car wash building.
)
Start the wash program with the button
<<START>>.
⇒ The vehicle will be cleaned.
⇒ When the wash cycle is finished, the roll-over
car wash system returns to its home position.
⇒ The traffic light shows the drive-out direction.
)
Enter vehicle and drive the car out of the wash
building.
Press the emergency-off button in case of prob-
lems or danger and inform the wash system op-
erator.
CAUTION