Operating instructions

SoftCare Evo - Type SE10 5-7
Operation mode 3
Chapter 5 - Washing operation
Automatic start is switched on, the entrance door is
closed and the driver remains in the vehicle during
the wash cycle.
)
Select a wash program (by card or by input at
the operating unit).
⇒ The entrance door opens
)
Close windows and doors and lock all doors
from the inside.
)
Drive the vehicle forward into the wash system
so that there is enough space on each side.
)
Position the vehicle correctly
⇒ The traffic light shows “Stop”.
)
Turn off the engine, put the car in PARK (for
a standard car put the car in 1st gear) and ap-
ply the parking brake.
)
Remain seated in the vehicle.
⇒ The wash cycle starts.
⇒ The vehicle will now be washed.
⇒ When the wash cycle is finished, the roll-over
car wash system returns to its home position.
⇒ The traffic light shows the drive-out direction.
)
Drive the vehicle out of the car wash building.
Leaving the vehicle can cause serious accidents.
Inform the customer that he should never leave
the car and that he should wait for instructions.
For wash systems which are operated in self-
service mode, e.g. the operator or his personnel
are not present during the wash cycle, it is highly
recommended to install a video surveillance for
controlling the wash area.