Operating instructions

SoftCare Evo - Type SE10 5-10
Step 4
Continue wash
Step 5
Vehicle or system
damaged
Chapter 5 - Washing operation
The LEDs in the buttons <<OK>> and <<CANCEL>>
flash alternately after the cause of the emergency
stop or malfunction has been fixed.
You may now continue or terminate the wash. Con-
tinue with step 6 if you would like to terminate the
wash.
)
Press the button <OK> at the operating unit.
⇒ The wash program will be continued.
Watch the further wash procedure. Press imme-
diately the emergency-off button when you rec-
ognize that a malfunction may occur again.
Continuation of the wash after occurrence of fur-
ther malfunctions may cause damages to the ve-
hicle and/or wash system.
Repeat step 3 and terminate the wash
(see step 6).
)
Determine the damage.
)
At damage to the vehicle: Make a note of the
damage and its cause in a damage report.
You can find an example in the appendix of
these operating instructions. The damage re-
port must be signed by the wash system op-
erator and by the car wash customer.
CAUTION
NOTICE