Operating instructions

SoftCare Evo - Type SE10 5-12
Step 7
Move system with
malfunction in home
position
Step 8
Chapter 5 - Washing operation
If you cannot fix the cause for the emergency stop or
the malfunction the failure cannot be acknowledged.
However you may move the system in home position
under certain conditions.
)
Check if the roll-over car wash system can be
moved in home position without further dam-
age to the vehicle.
)
Release the emergency-off button (if actu-
ated).
)
Press the button <<Home position>> (If the
operating unit CP0 is installed you probably
have to shift the home position symbol into the
display by using the navigation buttons. Select
the symbol with one of the buttons F1 to F4).
⇒ All devices move outwards or upwards. After-
wards the roll-over moves in home position.
)
Press immediately the emergency button
when you recognize any problems, e.g. brush
gets caught or device does not move. Inform
WashTec Service.
)
Remove the vehicle from the roll-over car
wash system and initiate steps for legal set-
tlement of damage claims.
)
Switch off the system (when the system has
been damaged) and inform WashTec Service.