Operating instructions

SoftCare Evo - Type SE10 6-2
Reduced pressure
Chapter 6 – Settings and checking
Several pneumatic components (e.g. wheel washer)
and the foam spray systems are operated with re-
duced air pressure. This pressure is adjusted at the
according pressure regulators.
The illustration below shows the position of the pres-
sure regulators at maximum configuration. The loca-
tion of the pressure regulators changes if less pres-
sure regulators are installed (e.g. no foamed chemi-
cal pre-wash). You may identify the pressure regula-
tors either by coloured markings (e.g. foam pre-wash
= light green) or by labels.
Pos. Function Marking
1 Wheel washer Label
2 Foam pre-wash By colour
(light green)
3 Preservation
(e.g. foam wax)
By colour
(orange)
4 Chemical pre-wash foamed By colour
(dark green)
5 PE brush as from height 28 Label