Operating instructions

SoftCare Evo - Type SE10 7-1
CAUTION
Chapter 7 - Maintenance and care
7. Maintenance and care
7.1. Safety instructions
Maintenance, service and care work carried out
on the machine while it is switched on can cause
serious accidents.
Always work through the following steps before
starting maintenance, service and care work:
)
Move the roll-over car wash system into an
easily accessible position
)
Switch off the electricity on the complete
system
)
Turn off the compressed air. Close the air
supply at the ball valve located in the fluid-
technical system cabinet and turn the input
pressure regulator to 0 bars.
)
Switch off water supply.
)
Secure the system to prevent it from being
switched on unintentionally.
Objects such as tools, cleaning supplies, etc.
which remain in or on the system after comple-
tion of maintenance or care work may cause
damage to the system or vehicles.
)
Makes sure that all objects are removed
from the system after completion of mainte-
nance or care work.