Operating instructions

SoftCare Evo - Type SE10 7-6
Water hardness
Chapter 7 - Maintenance and care
7.2.4. Cleaning of plastic parts
Plastic parts (claddings, displays, etc.) may be
damaged or scratched when they are cleaned
with rough surfaces (e.g. brushes) or when they
are dry cleaned.
Clean plastic parts only with wet soft clothes or
sponges.
7.2.5. Cleaning of the brushes
The following description applies to the cleaning of
original WashTec brushes.
The water hardness has substantial influence on the
type of pollution. If the water hardness is higher than
10 °dH (German hardness) lime deposit may be
causing the pollution in the first place.
)
Ask your water supply company for the water
hardness.
The water hardness can be specified in hardness
grade or by the content of calcium and magnesium.
Furthermore the hardness grades are country spe-
cific.
CAUTION