Operating instructions

SoftCare Evo - Type SE10 8-2
Procedure at
error messages
Chapter 8 - Error messages
Modules, type of failure and cause of failure are
combined by the controller and displayed on the
operating unit.
Example:
Module
Part
name
Failure
No.
Type of
failure Cause of failure
DB1 S14 002 Stop position
not discon-
nected
Upper limit switch
DD1 S19 002 Stop position
not discon-
nected
Upper limit switch
)
Read off the error message on the operating
unit and make notice of the message.
)
Execute the steps as described in chapter 5.4.
“Procedure for emergency stops and malfunc-
tions“.