Operating instructions

SoftCare Evo - Type SE10 8-7
Chapter 8 - Error messages
Type of failure and cause of failure – Part 3
No. Type of failure Cause of failure
077 Tank empty Foam
078 Tank empty Special chemical 1
079 Tank empty Special chemical 2
080 Dry running protection System
081 Dry running protection Fresh water pump
082 Dry running protection Recycled water pump
083 Dry running protection High pressure pump
084 Dry running protection Osmosis pump
085 Frost protection activated Plant
086 Fuse tripped Pumps
087 Fuse tripped
088 System switched on
089 Factory settings loaded Parameter
090 Data error: copy loaded Parameter
091 Emergency copy loaded Parameter
092 Config. update loaded
093 Counter deleted
094 Data exchange with PC
095 Cannot initialize SMC
096 Data backup deviation Parameter
097 Data backup Parameter
098 Read/write error SMC
099 Hardware configuration error
100 Communication interrupted
101 Card memory full
102 Remaining value too low
103 Card invalid
104 Power limit reached Frequency converter
105 Short-circuit, overload Output, mains for FC
106 Short-circuit, overload Output, lift motor brake
107 Short-circuit, overload Output, forwards rotation
108 Short-circuit, overload Output, backwards rotation
109 Short-circuit, overload Output, feed in
110 Short-circuit, overload Output, feed out