UNDER MOUNT SINKS INSTALLATION INSTRUCTIONS These instructions dare for Installing Under mount stainless steel sinks Under mount sinks are sinks hat are mounted firm below the counter top.
STEP (Recommended for professional Installers only.) Create a template Using a framing square, draw a fine from front to back on the bottom of the counter top, indicating the location of the center of the sink. Draw a line parallel io the front edge of the counter ion. indicating how far back the sink should be located. Typically he setback 1s 2" fo from the front of the counter. depending on the counter top overhang the type of sink howl and the size of the sink deck.
9 STEP 3 Recommended for professional installers ably) the under mount clips. Position bowl so hat reveal Is equidistant ‘Thieu on underside of counter top, drill holes for brass inserts of under mount clips. Use a drill bit with stop block to avoid drilling through the top: for 1/2" counter top material, drill 3/8" deep holes. Use thee clips on the long sides of the sink; and two clips on the short sides of the sink. or follow the Locations on the template that comes with the sink.