Instruction Manual

ManualsBrandsWater Inc ManualsFreezers72” Signature Series

Loading Product

IMPORTANT NOTE: Before storing perishables,

allow unit to run for a minimum of 24 hours to al-

low temperature stabilization after start-up.

When loading items into unit, do no block internal

louvers and fan guard openings or performance will

be decreased.

Temperature Control Panel

The controller is located inside of the unit. The

display will read OFF when unit o and will show

temperature when unit is on.

IMPORTANT NOTE: the led display is reading

actual air temperature not product temperature.

Under these conditions, an air temperature swing

does not change the actual product temperature.

Product temperature remains at a very stable

temperature.

Freezer: 10° swing

Refrigerator 6° swing

Beverage Center 6° swing

Beer Dispenser 6° swing

Wine Reserve 4° swing

72” Signature Series

The 72” Signature Series comes equipped with a

state of the art refrigeration system. The compressor

is of a variable speed variety, which automatically

changes speeds based on system conditions and

load. The cabinet is equipped with two adjustable

digital temperature controllers and LED displays.

IMPORTANT NOTE: Always allow cabinet to run

for a minimum of 24 hours to allow temperature

stabilization after start-up before storing perish-

able items.

IMPORTANT NOTE: Perlck’s multi-zone units are

not recommended for outdoor applications.

This cabinet is a frost-free model meaning the evap-

orator (cooling coil) automatically defrosts on de-

mand at predetermined intervals. The controller also

has a manual defrost soft button on the front panel

signied by a melting snowake. If depressed it will

automatically put the system into a defrost cycle.

Interior Light

The 72” unit has three interior lights that are illu-

minated when the corresponding door is opened.

The unit also comes standard with manual light

switches located next to each light for displaying

your products through a glass door. If manual light

switch is left on for an extended period of time it

may increase the cabinet temperature, especially in

close proximity to the light at the top and cause the

refrigeration system to run longer.