BAR FAUCET INSTALLATION INSTRUCTIONS Model #s: 1300 1350 1500 1502 1550 1552 1600 1625 1800 1850 2500 1300 1350 1500 1550 1502 1552 1800 1850 1600 2500 1625
INSTALLATION GUIDE BEFORE YOU BEGIN YOUR INSTALLATION: 1 2 Turn off water supply. 3 Observe all local plumbing codes. Inspect waste and water supplies for signs of damage. Replace as necessary. REQUIRED TOOLS: 1. Adjustable Wrench 4 2. Phillips Screwdriver DO NOT use petroleum based products on this faucet.
BAR FAUCET INSTALLATION 1. 2. A B COUNTER OR SINK C D Slide escutcheon plate (A) onto threaded shroud (B) and up to base of faucet. 3. 4. E F Turn faucet to the desired handle position. Securely tighten nut with adjustable wrench. Slide washer (E) and thread the nut (F) onto threaded shroud. Hand tighten nut to underside of sink or counter. Fit flexible hoses (C, D) through hole on counter or sink.
CONNECTING SUPPLY HOSES 1. Before connecting supply hoses, flush supply stops to clear any debris. Place a bucket underneath stops and run water for 5 to 10 seconds. Turn water off. 2. Carefully position hot and cold supplies so they will not interfere with other hoses. 3. Connect supply hoses (A) to supply stops (B). DO NOT use teflon tape or plumbers putty. Turn water back on and check for leaks. A B CLEANING AERATOR AND DEBRIS SCREEN 1. 2. B 3. 4. 5.