FILTRATION FAUCET INSTALLATION INSTRUCTIONS Filtration Model #s: 1100H 1425H 1100C 1425C 1100HC 1425HC 1150H 1700H 1150C 1700C 1150HC 1700HC 1200H 1750H 1200C 1750C 1200HC 1750HC 1250H 1900H 1250C 1900C 1250HC 1900HC 1202H 1202C 1202HC 1252H 1252C 1252HC 1400H 1400C 1400HC
INSTALLATION GUIDE BEFORE YOU BEGIN YOUR INSTALLATION: 1 2 Turn off water supply. 3 Observe all local plumbing codes. REQUIRED TOOLS: 1. Adjustable Wrench 4 Inspect waste and water supplies for signs of damage. Replace as necessary. PARTS INCLUDED: COLD ONLY HK-CFF-XX* COLD ONLY FITRATION HARDWARE KIT DO NOT use petroleum based products on this faucet.
HOT AND COLD FILTRATION FAUCET INSTALLATION 1. 2. 3. 4. A B COUNTER OR SINK F C E D Slide escutcheon plate (A) onto threaded shroud (B) and up to base of faucet. Fit flexible hoses (C, D, E) through hole on counter or sink. (No plumbers putty is required. Vinyl washer seals base). Thread the nut (F) onto threaded shroud. Hand tighten nut to underside of sink or counter. Turn faucet to the desired handle position. Securely tighten nut with adjustable wrench.
COLD ONLY FILTRATION FAUCET INSTALLATION 1. 2. 3. A C COUNTER OR SINK B D E Slide escutcheon plate (A) onto threaded shroud (B) and up to base of faucet. Fit faucet shank through hole on counter or sink. (No plumbers putty is required. Vinyl washer seals base). Slide large washer (C) and star lock washer (D) onto shank. Thread the nut (E) and hand tighten underside of sink or counter. 4. 5. 6. Slide compression nut (F) over end of supply tube.