PLP PULLDOWN FAUCET INSTALLATION INSTRUCTIONS Pulldown Model #s: 5300 5200 5400 5900 5500 5930 5600 5700 5800 5300 5400 5900 5500 5600 5200 5700 5800 41180 Raintree Court • Murrieta, CA 92562 • 1-888-304-0660 • 951-304-0520 • www.waterstoneco.
INSTALLATION GUIDE BEFORE YOU BEGIN YOUR INSTALLATION: 1 2 Turn off water supply. 3 Observe all local plumbing codes. 4 Inspect waste and water supplies for signs of damage. Replace as necessary. REQUIRED TOOLS: DO NOT use petroleum based products on this faucet. PARTS INCLUDED: *XX represents finish HK-THC-XX* HANDLE BUTTON KIT (TRADITIONAL ONLY) 1. Adjustable Wrench HK-USM1375 UNDER SINK MOUNTING HARDWARE KIT (1-3/8”) 2. Phillips Screwdriver PULLDOWN FAUCET INSTALLATION 1. 2. 3. 4.
CONNECT THE PULL DOWN SPRAY HOSE CONNECTING SUPPLY HOSES A B Connect spray hose (A) to spray connection hose tube (B). A G C B C D E F NOTE – make sure spray hose (A) and counter balance (C) are free to slide up and down and are not in conflict with any plumbing components or items under sink. B 1. Before connecting supply hoses, flush supply stops to clear any debris. Place a bucket underneath stops and run water for 5 to 10 seconds. Turn water off. 2.
HOW TO ADJUST HANDLE POSITION AND HANDLE TENSION On some kitchen countertops, the handle may hit the backsplash when the faucet handle is positioned to the left or right (Fig. 1). Waterstone gives you the option of adjusting the handle 22 G degrees to avoid hitting backsplash. D E FIG.1 ORIGINAL FACTORY POSITION MAY HIT BACKSPLASH F NEW ADJUSTED POSITION CLEARS BACKSPLASH CONTEMPORARY B C C D 1. Unscrew and remove the metal cap (A). Remove Hot and Cold Indicator Ring (B). 2.
CLEANING DEBRIS SCREEN AND AERATOR - # 5200, 5500, 5600, 5700, 5800, 5930 1. 2. 3. B C D 4. A 1. Turn off water supplies underneath sink and remove any water pressure by opening the faucet handle. 2. Unscrew sprayer (A) from spray B hose by holding knurled swivel (B). C 3. Inspect, remove and clean debris screen (C) in sprayer. Once cleaned, replace debris screen and reattach to swivel. 4. Close faucet handle and turn on water supplies. Make sure sprayer is A secure and sealed by running faucet. 1.