User`s manual

DIN-A-MITE C Ordering Information (2366)
To order, complete the code number on the right with the information below:
Style C solid-state power controller
Phase
1=single-phase, 1 controlled leg
2=3-phase, 2 controlled legs
3=3-phase, 3 controlled legs (use with four wire wye)
8=2 independent zones (input control C, K)
9=3 independent zones (input control C, K)
Cooling and Current Rating Per Leg
0=Natural convection standard DIN rail or panel heatsink
1=Fan-cooled 120 V~ (ac) standard DIN rail or panel heatsink
2=Fan-cooled 240 V~ (ac) standard DIN rail or panel heatsink
3=Fan-cooled 24 V
Î (dc) fan standard DIN rail or panel heatsink
T=Natural convection through-wall or cabinet heatsink (UL 50)
Line and Load Voltage
02 = 24 to 48 V~ (ac) (Input Control Signal C, F, or K only)
12 = 100 to 120 V~ (ac) (Input Control Signal L, P or S only)
20 = 200 to 208 V~ (ac) (Input Control Signal L, P or S only)
24 = 120 to 240 V~ (ac) (Input Control Signal C, F or K only);
230 to 240 V~ (ac) (Input Control Signal L, P or S only)
27 = 277 V~ (ac) (Input Control Signal L, P or S only)
40 = 400 V~ (ac) (Input Control Signal L, P or S only)
48 = 480 V~ (ac) (Input Control Signal L, P or S only)
60 = 277 to 600 V~ (ac) (Input Control Signal C, F or K only);
600 V~ (ac) (Input Control Signal L, P or S only)
Input Control Signal
C0 = 4.5 to 32 VÎ (dc) contactor
K1 = 22 to 26 V~ contactor
K2 = 100 to 120 V~ contactor
K3 = 200 to 240 V~ contactor
F( )=Proportional
0 = 4 to 20 mA
L(0 to 5) = Phase angle with current limiting (DC1 only, Alarm 0 only,
includes one current transformer - Single phase only)
P(0 to 5) = Phase angle (DC1 only, Alarm 0 only - Single phase only)
S(0 to 5) = Single-cycle variable time base
(Select one of the gollowing input options for L, P, S, (0-5))
0 = 4 to 20 mA
1 = 12 to 20 mA
2 = 0 to 20 mA
3 = 0 to 5 VÎ (dc) proportional
4 = 1 to 5 VÎ (dc) proportional
5 = 0 to 10 VÎ (dc) proportional
Alarm
0=No alarm
S=Shorted-SCR alarm
H=Open-heater and shorted-SCR alarm (for Input Control Signal option S only)
User Manual Language
0=English
1=German
2=Spanish
3=French
Custom Part Numbers
00 = Standard part
1X = 1-second soft start (control option P, L)
XX = Any letter or number, custom options, labeling, etc.
4
WATLOW DIN-A-MITE Style C User's Manual
Recommended semiconductor fuse for applications through 600 VÅ (ac):
Fuse part number Fuse Holder part number
DIN-A-MITE Watlow Bussmann Ferraz DIN-A-MITE Watlow Ferraz
Model Model
30 A 17-8040 FWP-40A14F A093909 30 A 17-5114 PFZ-J081221
35 to 40 A 17-8050 FWP-50A14F B093910 35 to 40 A 17-5114 PFZ-J081221
45 to 50 A 17-8063 FWP-63A22F T094823 45 to 50 A 17-5122 PFZ-F220368
55 to 65 A 17-8080 FWP-80A22F A094829 55 to 65 A 17-5122 PFZ-F220368
75 A 17-8100 FWP-100A22F Y094827 75 A 17-5122 PFZ-F220368
__ __ __ __ - __ __ __ __ - __ __ __ __
D C
Current Rating Table
Phase Cooling Current
at 50°C
1055 A
1T60 A
1 1, 2, 3 75 A
2, 8 0 40 A
2, 8 T 45 A
2, 8 1, 2, 3 65 A
3, 9 0 30 A
3, 9 T 35 A
3, 9 1, 2, 3 55 A