Instruction Manual

4
2.8 SUBASSEMBLY IDENTIFICATION
The ANAFAZE 8 PID controller consists of a measurement/processing unit with integral
mounting frame, plug-in terminals for field wiring, LED indicators, power supply, and 9
card slots.
ANAFAZE 8 PID MEASUREMENT PROCESSOR UNIT
A8PID-MPU Standard measurement/processing unit
A8PID-MPU-IR4 Standard MPU wired for 4 IR inputs
A8PID-MPU-IR8 Standard MPU wired for 8 IR inputs
A8PID-SIXXX Custom input scaling per input
COMMUNICATION INTERFACES (must select one per MPU)
A8PID-232-N Standard non-isolated RS-232 card
A8PID-232-ISO Isolated RS-232 interface card
A8PID-422 RS-422 interface card
A8PID-20MA 20MA current loop interface card
OUTPUT CARDS (select up to 8 per MPU)
A8PID-TPV Time proportioning DCV
A8PID-O/F On-Off DCV
A8PID-A/ISO/4-20MA Analog isolated 4-20MA
A8PID-A/4-20MA Analog 4-20MA
A8PID-A/0-5V Analog 0-5V
A8PID-A/0-10V Analog 0-10V
ALARM OUTPUT AND MEMORY CARD (optional one per MPU)
A8PID-AEX Alarm expansion card
CABLES
CA-232M 25' RS-232 cable male computer connector
CA-232F 25' RS-232 cable female computer connector
CA-AEX 2' 50 pin ribbon cable: AEX to PCB-24
INPUT/OUTPUT ACCESSORIES -- USE WITH AEX
PCB-24 24-position input/output module board
PCB-IAC15 120VAC input module
PCB-IAC5A 240VAC input module
PCB-IDC5N 3.3-60VDC input module
PCB-OAC5 120VAC output module 5A SSR
PCB-OAC5A 240VAC output module 5A SSR
G280D10 280VAC 10A solid state relay SSR
G280D45 280VAC 45A solid state relay SSR
SOFTWARE
ANASOFT-PID Software operating program for ANAFAZE 8 PID