Owner manual

Watlow EZ-ZONE
®
PM Integrated Controller • 100 • Chapter 6 Setup Page
Setup Page
Dis-
play
Parameter Name
Description
Range Default
Modbus Rela-
tive
Address
CIP
Class
Instance
Attribute
hex (dec)
Pro-
fibus
Index
Param-
eter ID
Data
Type
&
Read/
Write
[iP;F2]
[ip.F2]
Communications (2)
IP Fixed Address Part
2
Set the IP address of this
module. Each device on
the network must have a
unique address.
0 to 255 254 - - - - - - - - - - - - 17015 - - - -
[iP;F3]
[ip.F3]
Communications (2)
IP Fixed Address Part
3
Set the IP address of this
module. Each device on
the network must have a
unique address.
0 to 255 1 - - - - - - - - - - - - 17016 - - - -
[iP;F4]
[ip.F4]
Communications (2)
IP Fixed Address Part
4
Set the IP address of this
module. Each device on
the network must have a
unique address.
0 to 255 1 - - - - - - - - - - - - 17017 - - - -
[iP;F5]
[ip.F5]
Communications (2)
IP Fixed Address Part
5
Set the IP address of this
module. Each device on
the network must have a
unique address.
0 to 255 0 - - - - - - - - - - - - 17018 - - - -
[iP;F6]
[ip.F6]
Communications (2)
IP Fixed Address Part
6
Set the IP address of this
module. Each device on
the network must have a
unique address.
0 to 255 0 - - - - - - - - - - - - 17019 - - - -
[iP;S1]
[ip.S1]
Communications (2)
IP Fixed Subnet Part 1
Set the IP subnet mask
for this module.
0 to 255 255 - - - - - - - - - - - - 17020 - - - -
[iP;S2]
[ip.S2]
Communications (2)
IP Fixed Subnet Part 2
Set the IP subnet mask
for this module.
0 to 255 255 - - - - - - - - - - - - 17021 - - - -
[iP;S3]
[ip.S3]
Communications (2)
IP Fixed Subnet Part 3
Set the IP subnet mask
for this module.
0 to 255 0 - - - - - - - - - - - - 17022 - - - -
[iP;S4]
[ip.S4]
Communications (2)
IP Fixed Subnet Part 4
Set the IP subnet mask
for this module.
0 to 255 0 - - - - - - - - - - - - 17023 - - - -
[iP;S5]
[ip.S5]
Communications (2)
IP Fixed Subnet Part 5
Set the IP subnet mask
for this module
0 to 255 0 - - - - - - - - - - - - 17024 - - - -
Note:
Some values will be rounded off to fit in the four-character display. Full values can be read
with other interfaces.
R: Read
W: Write
E: EEPROM
S: User
Set