Owner manual

Watlow EZ-ZONE
®
PM Integrated Controller • 101 • Chapter 6 Setup Page
Setup Page
Dis-
play
Parameter Name
Description
Range Default
Modbus Rela-
tive
Address
CIP
Class
Instance
Attribute
hex (dec)
Pro-
fibus
Index
Param-
eter ID
Data
Type
&
Read/
Write
[iP;S6]
[ip.S6]
Communications (2)
IP Fixed Subnet Part 6
Set the IP subnet mask
for this module.
0 to 255 0 - - - - - - - - - - - - 17025 - - - -
[iP;g1]
[ip.g1]
Communications (2)
Fixed IP Gateway Part
1
Used for the purpose of
sending and receiving
messages from another
network.
0 to 255 0 - - - - - - - - - - - - 17026 - - - -
[iP;g2
[ip.g2]
Communications (2)
Fixed IP Gateway Part
2
Used for the purpose of
sending and receiving
messages from another
network.
0 to 255 0 - - - - - - - - - - - - 17027 - - - -
[iP;g3]
[ip.g3]
Communications (2)
Fixed IP Gateway Part
3
Used for the purpose of
sending and receiving
messages from another
network.
0 to 255 0 - - - - - - - - - - - - 17028 - - - -
[iP;g4]
[ip.g4]
Communications (2)
Fixed IP Gateway Part
4
Used for the purpose of
sending and receiving
messages from another
network.
0 to 255 0 - - - - - - - - - - - - 17029 - - - -
[iP;g5]
[ip.g5]
Communications (2)
Fixed IP Gateway Part
5
Used for the purpose of
sending and receiving
messages from another
network.
0 to 255 0 - - - - - - - - - - - - 17030 - - - -
[iP;g6]
[ip.g6]
Communications (2)
Fixed IP Gateway Part
6
Used for the purpose of
sending and receiving
messages from another
network.
0 to 255 0 - - - - - - - - - - - - 17031 - - - -
[Mb;E]
[Mb.E]
Communications (2)
Modbus TCP Enable
Activate Modbus TCP.
[`YES} Yes (106)
[``no] No (59)
Yes - - - - - - - - - - - - 17041 - - - -
[EiP;E]
[EiP.E]
Communications (2)
EtherNet/IP™ Enable
Activate Ethernet/IP™.
[`YES} Yes (106)
[``no] No (59)
Yes - - - - - - - - - - - - 17042 - - - -
[ao;nb]
[Ao.nb]
Communications (2)
CIP Implicit Assembly
Output Member Quan-
tity
1 to 20 20 - - - - - - - - - - - - 24009 - - - -
Note:
Some values will be rounded off to fit in the four-character display. Full values can be read
with other interfaces.
R: Read
W: Write
E: EEPROM
S: User
Set