Owner manual

Watlow EZ-ZONE
®
PM Integrated Controller • 44 • Chapter 3 Keys and Displays
Navigating the EZ-ZONE PM Integrated Controller
®
[ ``Ai]
[`Set]
®
[ ``70]
[``72]
Home Page from anywhere: Press the Infinity Key ˆ for two seconds to return to the Home Page.
®
[ ``70]
[``72]
®
[ ``Ai]
[oper]
Operations Page from Home Page: Press both the Up ¿ and Down ¯ keys for three seconds.
®
[ ``70]
[``72]
®
[ ``Ai]
[`Set]
Setup Page from Home Page: Press both the Up ¿ and Down ¯ keys for six seconds.
®
[ ``70]
[``72]
®
[ ``p1]
[prof]
Profiling Page from Home Page: Press the Advance Key
‰
for three seconds
®
[ ``70]
[``72]
®
[ Cust]
[fCty]
Factory Page from Home Page: Press both the Advance
‰
and Infinity ˆ keys for six
seconds.
Note:
Keys must be held continuously
until [`SEt] is displayed in green.
If keys are released when [OPEr]
is displayed, press the infinity key
or reset key to exit and repeat until
[`SEt] is displayed.