Owner manual

ManualsBrandsWatlow ManualsSensorsEZ-ZONE PM Integrated Controller

100

Watlow EZ-ZONE

PM Integrated Controller • 95 • Chapter 6 Setup Page

Setup Page

Dis-

play

Parameter Name

Description

Range Default

Modbus Rela-

tive

Address

CIP

Class

Instance

Attribute

hex (dec)

Pro-

fibus

Index

Param-

eter ID

Data

Type

Read/

Write

[``Fn]

[ Fn]

Function Key (1 to 2)

Action Function

Program the EZ Key to

trigger an action.

Functions respond to a

level state change or an

edge level change.

Note:

The Limit Reset func-

tion is not available in

firmware revision 11.0

and above.

[none] None (61)

[`r;en] Remote Set Point en-

able (216)

[LMr] Limit Reset, edge trig-

gered (82)

[usr;r] User Set Restore, edge

triggered (227)

[P;LoC] Keypad Lockout, level

triggered (217)

[ALM] Alarm Reset, edge

triggered (6)

[`SiL] Silence Alarms, edge

triggered (108)

[`AoF] Control Loops Off and

Alarms to Non-alarm State,

level triggered (220)

[`F;AL] Force Alarm to occur,

level triggered (218)

[idLE] Idle Set Point, level

triggered (107)

[tUnE] Tune, edge triggered

(98)

[MAn] Manual, level trig-

gered (54)

[`oFF] Switch Control Loop

Off, level triggered (90)

[`t;da] TRU-TUNE+

Dis-

able, level triggered (219)

[P;diS] Profile Disable, level

triggered (206)

[P;hoL] Profile Hold/Resume,

level triggered (207)

[ProF] Start Profile, edge

triggered (196)

[P;StS] Profile Start/Stop,

level triggered (208)

[s;stp] Start Step (1077)

None Instance 1

Map 1 Map 2

1364 1604

Instance 2

Map 1 Map 2

1384 1624

0x6E (110)

3 to 4

138 10003 uint

RWES

[``Fi]

[ Fi]

Function Key (1 to 2)

Function Instance

Select which instance the

EZ Key will affect. If only

one instance is avail-

able, any selection will

affect it.

1 to 4 0 Instance 1

Map 1 Map 2

1366 1606

Instance 2

Map 1 Map 2

1386 1626

0x96 (110)

3 to 4

139 10004 - - - -

[gLbL]

[`Set]

Global Menu

[`C_F]

[ C_F]

Global

Display Units

Select which scale to use

for temperature.

[```F] °F (30)

[```C] °C (15)

°F Instance 1

Map 1 Map 2

1838 2308

0x67 (103)

110 3005

uint

RWES

Note:

Some values will be rounded off to fit in the four-character display. Full values can be read

with other interfaces.

R: Read

W: Write

E: EEPROM

S: User

Set

Note:

When changing IP address the control power must be cycled for the new address to take effect.