User guide

Watlow EZ-ZONE
®
PM PID Controller • 32 • Chapter 4 Home Page
Applies to All Models - 1/16 DIN Shown Below
®
[ ``Ai]
[`Set]
®
[ ``70]
[``72]
®
[ ``70]
[``72]
®
[ Cust]
[fCty]
Home Page from anywhere: Press the Infinity
Key ˆ for two seconds to return to the Home Page.
Factory Page from Home Page: Press both the
Advance
‰
and Infinity ˆ keys for six seconds.
®
[ ``70]
[``72]
®
[ ``Ai]
[oper]
Operations Page from Home Page: Press both
the Up ¿ and Down ¯ keys for three seconds.
®
[ ``70]
[``72]
®
[ ``Ai]
[`Set]
Note:
Keys must be held continuously until [`SEt]
is displayed in green. If keys are released when
[OPEr] is displayed, press the infinity key or
reset key to exit and repeat until [`SEt] is dis-
played.
Setup Page from Home Page: Press both the
Up ¿ and Down ¯ keys for six seconds.
®
[ ``70]
[``72]
®
[ ``p1]
[prof]
Profiling Page from Home Page: Press the
Advance Key
‰
for three seconds.
Navigating the EZ-ZONE
®
PM PID Controller