User guide

Watlow EZ-ZONE
®
PM PID Controller • 80 • Chapter 8 Factory Page
Factory Page
Dis-
play
Parameter Name
Description
Range Default
Modbus
Relative Ad-
dress
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Param-
eter ID
Data
Type
&
Read/
Write
[LoC;P]
[LoC.P]
Security Setting
Profiling Page
Change the security level
of the Profiling Page.
1 to 3 3 - - - - - - - - - - - - 3008 uint
RWE
[pas;e]
[LoC.P]
Security Setting
Password Enable
Set to on to require
a password for menu
changes.
[`off] Off
[``on] On
Off - - - - - - - - - - - - 3009 uint
RWE
[rLoC]
[rLoC]
Security Setting
Read Lock
Set the read security
clearance level. The user
can access the selected
level and all lower levels.
If the Set Lockout Security
level is higher than the
Read Lockout Security,
the Read Loc kout Secu-
rity level takes priority.
1 to 5 5 - - - - - - - - - - - - 3010 uint
RWE
[SLoC]
[SLoC]
Security Setting
Write Security
Set the write security
clearance level. The user
can access the selected
level and all lower levels.
If the Set Lockout Security
level is higher than the
Read Lockout Security,
the Read Locko ut Secu-
rity level takes priority.
0 to 5 5 - - - - - - - - - - - - 3011 uint
RWE
[loC;l]
[LoC.L]
Security Setting
Locked Access Level
Determines user level
menu visibility when
Password Enable is set to
on. See Features section
under Password Security.
1 to 5
5 - - - - - - - - - - - - 3016 uint
RWE
[roll]
[roLL]
Security Setting
Rolling Password
When power is cycled a
new Public Key will be
displayed and User Pass-
word changes.
[`off] Off
[``on] On
Off - - - - - - - - - - - - 3019 uint
RWE
[pas;u]
[PAS.u]
Security Setting
User Password
Used to acquire access
to menus made available
through the Locked Access
Level setting.
10 to 999
63 - - - - - - - - - - - - 3017 uint
RWE
Note:
Some values will be rounded off to fit in the four-character display. Full values can be
read with other interfaces.
If there is only one instance of a menu, no submenus will appear.
R: Read
W: Write
E: EEPROM
S: User
Set