TM TM C-AM-2E C-VM-2E Dual Position Li-ion Battery Charger with DC Output Thank you for choosing Watson Pro Please read this user manual carefully and keep it for reference before using the charger.
SAFETY INSTRUCTIONS Do not store, place, or use the charger where it may come into contact with excess heat, water, or moisture. High-voltage internal components present the risk of electrical shock. Make sure the XLR cable is securely locked into the port before use. You should hear an audible click. Charge only at room temperature on a dry, vibration-free surface.
1 8 5 8 2 7 7 3 6 4 4 4 4 STATUS INDICATORS 1 1. Charging status indicator 6 1. Power switch 2 1. Power indicator 7 1. Battery release latch 3 1. DC output (4-pin XLR) 8 2. Battery mount 4 1. Charger stand (2 × legs) 5 1. AC input Included: • AC power cable • 4-pin XLR cable STATUS INDICATORS Off • Charger is turned on with no batteries connected. (C-VM-2E) Green • Charger is turned on with no batteries connected.
3-STUD MOUNT CHARGER (C-AM-2E) OPERATION The charger will recognize when a battery is connected to the L or R channel. When two batteries are connected, the charger will output 2.5 A per channel. When one battery is connected, the charger outputs 5 A to the connected battery. Battery type (Ah) Single batteries (hr.) Dual batteries (hr.) Charging order with two batteries 4.4 1.2 2.5 Simultaneous 6.6 1.8 3.8 Simultaneous 8.8 2.5 5.0 Simultaneous 11 3.2 6.5 Simultaneous 13.2 3.8 7.
