Specifications

CONTENTS

DRIVE CAP ASSEMBLY, DOWNFLOW PISTON, UPFLOW PISTON,

REGENERANT PISTON AND SPACER STACK ASSEMBLY

Drawing No. Order No. Description Qty.

1 KC12V3005 W100SM Spacer Stack Assembly 1

2 KC12V3004 Drive Cap ASY 1

3 KC12V3135 O-ring 228 1

4 KC12V3011 W100SM Piston Downflow ASY 1

5 KC12V3174 W100SM Regenerant Piston 3

6 KC12V3180 O-ring 337 1

Note: The regenerant piston is not used in backwash only applications.

Drawing No. Order No. Description Qty.

1 KC12V3176 Injector Cap 1

2 KC12V3152 O-ring 135 1

3 KC12V3177 Injector Screen 1

4 KC12V3010-12 W100SM Injector ASY Z Plug 1

5 KC12V3010-10 W100SM Injector ASY D Red 1

KC12V3010-IE W100SM Injector ASY E White 1

Not Shown KC12V3170 O-ring 011 *

Not Shown KC12V3171 O-ring 013 *

*The injector plug and the injector each contain one 011 (lower)

and one 013 (upper) o-ring.

Note: For upflow position, injector is located in the up hole and injector

plug in the down hole. For a filter that only backwashes injector plugs

are located in both holes.

INJECTOR CAP, INJECTOR SCREEN, INJECTOR, PLUG AND O-RING