Product Overview

Series LFWGV
Lead Free* Brass Gate Valves
Sizes
1
⁄2" - 1"
Series LFWGV Lead Free* Brass Gate Valves are ideal for gen-
eral service on water, oil, or compressed gas applications. This
series features threaded bonnet, non-rising stem and Lead Free*
brass body. The LFWGV features Lead Free* construction to
comply with Lead Free* installation requirements.
Features
• Threaded bonnet
• Non-rising stem
• Lead Free* brass body
•
1
⁄2" - 1" threaded IPS end connections
Pressure - Temperature
• 200psi (13.8 bar) WOG non-shock
to 180°F (82°C)
Materials
Nut: Steel
Name Plate: Aluminum
Handwheel: Aluminum
Stem: Lead Free* Brass
Packing Nut: Brass
Gland: Brass
Packing: Nitrile
Bonnet: Lead Free* Brass
Lock Nut: Brass
Wedge Disc: Lead Free* Brass
Body: Lead Free* Brass
Specifications
Valve shall be manufactured out of brass and be pressure rated
to 200psi WOG non-shock. Lead Free* Brass Gate Valves shall
be constructed using Lead Free* materials. Lead Free* valves
shall comply with state codes and standards, where applicable,
requiring reduced lead content. Valve shall have threaded bon-
net and non-rising stem. Valve shall be a Watts Series LFWGV.
SIZE DIMENSIONS WEIGHT
A C K
in. in. mm in. mm in. mm lbs. kg
1
⁄2 1
7
⁄8 48 3 76 2
1
⁄16 52 .63 .29
3
⁄4 1
7
⁄8 48 3
11
⁄32 85 2
5
⁄32 55 .84 .38
1 2
5
⁄32 54.5 3
15
⁄16 100 2
7
⁄16 62 1.25 .57
LFWGV
K
A
C
(open)
For Commercial & Residential Applications
ES-LFWGV
Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
–––––––––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Engineer
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Representative
––––––––––––––––––––––––––––––––––––––––
LEAD FREE
*
ES-LFWGV 1346 © 2013 Watts
USA: T: [phone] • F: [phone] • Watts.com
Canada: T: [phone] • F: [phone] • Watts.ca
Latin America: T: (52) 81-1001-8600 • Watts.com
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
*The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.
NOTICE
Inquire with governing authorities for local installation requirements
The information contained herein is not intended to replace the full
product installation and safety information available or the experience
of a trained product installer. You are required to thoroughly read all
installation instructions and product safety information before begin-
ning the installation of this product.
NOTICE