Installation Manual

800.879.8585
www.legrand.us/wattstopper
No. 24616 – 10/16 rev. 1
© Copyright 2016 Legrand All Rights Reserved.
© Copyright 2016 Tous droits réservés Legrand.
© Copyright 2016 Legrand Todos los derechos reservados.
Wattstopper warranties its products to be free
of defects in materials and workmanship for a
period of five (5) years. There are no obligations
or liabilities on the part of Wattstopper for
consequential damages arising out of, or in
connection with, the use or performance of this
product or other indirect damages with respect
to loss of property, revenue or profit, or cost of
removal, installation or reinstallation.
Wattstopper garantit que ses produits sont
exempts de défauts de matériaux et de fabrication
pour une période de cinq (5) ans. Wattstopper
ne peut être tenu responsable de tout dommage
consécutif causé par ou lié à l’utilisation ou
à la performance de ce produit ou tout autre
dommage indirect lié à la perte de propriété, de
revenus, ou de profits, ou aux coûts d’enlèvement,
d’installation ou de réinstallation.
Wattstopper garantiza que sus productos
están libres de defectos en materiales y mano
de obra por un período de cinco (5) años. No
existen obligaciones ni responsabilidades por
parte de Wattstopper por daños consecuentes
que se deriven o estén relacionados con el
uso o el rendimiento de este producto u otros
daños indirectos con respecto a la pérdida
de propiedad, renta o ganancias, o al costo
de extracción, instalación o reinstalación.
WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA
Cable goes
through wall
Cable goes
on wall surface
Or
Mounting when running the
RJ-45 cable through wall.
Mounting when running the RJ-
45 cable on the wall surface.
Template hole size
diameter to drill for
cable is 0.875".
Tape
Visually align to markers on
wall, then press on wall.
Apply tape to rear
recess as shown.
Or
Remove tab
when running RJ-45 cable
on the wall surface
Connect RJ-45 cable
and photosensor as
shown.
RJ-45 Cable Going
Through Wall
RJ-45 Cable Run
on the Wall Surface
Slide sensor into the
LMLS-MB2 wall mount
bracket to finish.
Placement Example
when mounting with double sided tape
Mounting Instructions
Wiring Detail