User Manual

Input/Output Calibration controls:

The Calibration controls allow you to calibrate the signal output that runs

from your analog device (going to the MaxxBCL) to the MaxxBCL’s input,

and the analog output of the MaxxBCL (going to the unit following the

MaxxBCL in the signal chain). This allows you to get the maximum head

room available in your audio working environment.

Input Calibration:

Set your analog device to its maximal output level and set the input rotary

switches on the MaxxBCL front panel to unity gain. Now adjust the input

Calibration so that your peak signals are between -6 and 0dB(FS) on the

input meters.

Output Calibration:

To adjust the MaxxBCL’s output, set the Calibration control so that the input

level on your analog device (the one that follows the MaxxBCL in the signal

chain) does not exceed Unity gain.

Options: Input: + 9, 12, 15, 18, 20, 24 dBu. Output: + 9, 12, 15, 18, 20, 24

dBu

maxxBclManualFinal.indd 13 4/19/05 6:25:00 AM