User Manual

Front panel dedicated buttons:

I/O selector: Analog, AES (XLR), S/PDIF (RCA/Optical)

Sync: Internal, Digital, external word sync

Sample Rates: 44.1, 48, 88.2, 96 kHz

Quantize: 16-bit, 24-bit

Peak (short click): Resets all inﬁnite peak hold metering on the MaxxBCL

front panel

Peak (Click and 2 Second hold): Toggles between peak holding modes

Compressor Bypass: 48-bit hardwire bypass

Opto/Electro: toggles between 2 compressor behaviors

Comp4Bass/Bass4Comp: Toggle effect chain

Attack: 0.5, 1, 2, 5, 10, 15, 20, 50ms

MaxxBass™ Bypass: 48-bit hardwire bypass

HPF: include original bass signal

Limiter Bypass: 48-bit hardwire bypass

Link: linking threshold and out ceiling controls

Power switch: On/Off

Front panel dedicated rotary controls:

Analog trim controls: Range is -6/+5 dB for analog input adjustment

Compressor Ratio: Range is 1:1 to 1:12, calibration: 0.1 steps

Compressor Threshold: Range is -60.0 to 0.0dB, calibration: 0.1dB steps

MaxxBass™ Cutoff Frequency: Range is 25.0 to 120Hz

MaxxBass™ Intensity: Range is 0 to 100%, calibration: 1% steps

Limiter Threshold: Range is -18 to 0dB, calibration: 0.1dB steps

Limiter Out Ceiling: Range is -18.0 to 0.0dB, calibration: 0.1dB steps

Front panel dedicated numeric displays:

Compressor Ratio: 1 to 12 (:1)

Compressor Threshold: -60.0 to 0.0dB

MaxxBass™ Frequency: 25.0 to 120Hz

MaxxBass™ Intensity: 0 to 100%

Limiter Threshold: -18 to 0dB

Limiter Out Ceiling: -18.0 to 0.0dB

Front panel displays:

Input meter range: 0.0 to -90dB

Output meter range: 0.0 to -90dB

Compressor Attenuation meter range: -0.5 to -12 dB

Limiter Attenuation meter range: -0.5 to -12 dB

maxxBclManualFinal.indd 37 4/19/05 6:25:14 AM