user manual

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
18
Tools Needed:
Attaching Horizontal Track to
Quick Install Flagangle
NOTE: If you have fully adjustable
flagangle, skip this step and complete
Step 12.
To install horizontal track, align the
key slot of the horizontal track with the
quick install tab of the flagangle. Push
curved portion of horizontal track down
to lock in place.
Level horizontal track and bolt the top
curve of the low headroom horizontal
track slot in the flagangle using (1)
5/16” washer, (1) 1/4”- 20 x 9/16”
track bolt and (1) 1/4”- 20 flange hex
nut. Repeat for other side.
NOTE: If an idrive
®
opener will be
installed, position horizontal tracks
slightly above level.
NOTE: After completing this step,
continue with Step 13.
KEY SLOT
QUICK
INSTALL
TAB
HORIZONTAL
TRACK
VERTICAL
TRACK
FLAGANGLE
11
7/16” Socket
Ratchet Wrench
7/16” Wrench
Level
KEY SLOT
QUICK
INSTALL
TAB
HORIZONTAL
TRACK
VERTICAL
TRACK
FLAGANGLE
(1) 1/4”- 20 X 9/16”
TRACK BOLT
(1) 1/4”- 20
FLANGE HEX
NUT
TOP CURVE OF
LOW HEADROOM
HORIZONTAL TRACK
(1) 5/16” WASHER
FLAGANGLE