Technical Data Sheet

TECHNICAL DATA SHEET
WD-40
®
Specialist
®
RUST RELEASE PENETRANT SPRAY
PRODUCT DESCRIPTION
WD-40
®
SPECIALIST
®
RUST RELEASE PENETRANT penetrates deep into crevices, threads and
seams to break the bonds that hold stuck parts together. It also leaves behind a protective layer and
helps prevent rust and corrosion from re-forming. Containing Blu Torch
™
Technology, a proprietary
APPLICATIONS FEATURES & BENEFITS
 NUTS
 BOLTS
 PIPE THREADS
 LOCKS
 CHAINS
PHYSICAL and CHEMICAL PROPERTIES
Fast-acting
Extra-penetrating
Blu Torch
™
Technology
Ideal for use on
nuts, bolts,
threads and
50-state VOC
compliant
Boiling Point (initial):
221°C (430°F)
Specific Gravity:
Not Determined
Solubility in Water:
Insoluble
pH:
Not Applicable
Vapor Pressure:
2.03mmHg @ 20°C
(Petroleum Solvent)
Vapor Density:
5.3 (Petroleum Solvent)
Percent Volatile:
>80%
VOC:
24.51%
Coefficient of
Water/Oil Distribution:
Not Determined
Appearance/Odor:
Clear liquid with
a pleasant odor.
Flash Point:
64°C (147°F) (CC ASTM D3828)
Flammable Limits:
LEL: 0.6% UEL: 5.6%
PERFORMANCE RESULTS
NAIL CLIMB TEST
To determine the penetrating ability of a fluid, a large nail is used
to evaluate how quickly and completely the fluid will move up a
vertical surface. WD-40 Specialist Rust Release Penetrant with
Blu Torch Technology travels up a nail 50% faster than B’Laster!
2 cm 3.9 cm
WD-40 Specialist
10 min 60 min
B’Laster
15 min 120 min
SHAKE CAN WELL. Flip straw up for pinpoint STREAM or down for wide angle SPRAY. Saturate the
surface to be loosened and let soak for several minutes. Re-apply if necessary.
DIRECTIONS
Safe to use on
plastics, rubber
and metal
Frees rusted
parts 50% faster
than the leading
competitor
NSF H2
Reg #