User Manual

LED Behavior/Color LED Lights On Indicates...
Blue (blinking for 5 seconds) 1st The USB host port is unavailable
due to low battery (less than
15%).
Off ---- Directly Attached to Storage
(DAS): The device is directly
connected to a computer and
not being charged.
Wi-Fi LED
The Wi-Fi LED is off when you take the My Passport Wireless Pro/My Passport
Wireless SSD drive out of the box.
LED Behavior/Color Indicates ...
Off Wi-Fi not active (device is off)
Blinking Blue Device is booting up, connecting to wireless, or shutting down.
Solid Blue Wireless network connected or active (all modes)
Fast-Blinking Blue Wi-Fi Protected Setup (WPS) is initiated and in progress
LED Activity During SD/USB Import
LED Behavior/Color Indicates...
Drive Status LED blinking blue The SD or USB device is being mounted. The
content database is building.
Battery Status LEDs 1 through 4 blinking blue in
succession
Content is importing to the My Passport Wireless
Pro/My Passport Wireless SSD device.
All four Battery Status LEDs are blinking blue
after: 1) import button pressed, or 2) SD/USB
inserted for auto import
The import process has failed. Check the web
dashboard for more information.
Other LED Behavior
LED Behavior/Color Indicates...
All LEDs fast blinking blue Device has a problem. Contact WD Support.
All LEDs blinking blue in one long (3 sec) and 3
short blinks.
Device in recovery mode. This process may be
necessary if the device has bad or corrupted
configuration settings, or the drive has failed.
Drive Status LED blinking blue Firmware update in progress; File I/O in SD
card/USB port syncing; Mounting USB storage;
Scanning SD card
Understanding the LEDs and Buttons
My Passport Wireless Pro/My Passport Wireless SSD
User Manual
6