User Manual

the factory charge may have decreased during shipping. If you
plan to store the drive, charge the battery before and after you
store it.
1. Connect one end of the cable (included in the box) into the drive’s USB port
and the other end into the adapter (included in the box).
2. Plug the adapter into a wall socket.
3. The LEDs start to pulse. As the drive charges, the Power and Battery Status LED
pulses. The number of LEDs indicate the amount of battery charge. When all
four Battery Status LEDs are solid blue, the drive is fully charged. (See
“Understanding the LEDs and Buttons”)
Other ways to tell If the drive is charging:
▪ On the Home page, a lightning bolt is added to the Battery panel.
▪ On the Hardware page, the Power State changes to Charging.
Viewing Battery Status When Drive is Off
▪ Press the Battery button for one second. The Power and Battery Status LEDs
indicate the amount of charge remaining in your battery.
Using the Battery
My Passport Wireless Pro/My Passport Wireless SSD
User Manual
40