User Manual

12
Updating Firmware
This chapter includes the following topics:
Viewing the Firmware Version
Updating with Available Firmware
Performing a Manual Update
The Firmware page allows you to automatically or manually check for an update
file
and then install it. To check automatically and install an available file, the drive must
be connected to the Internet.
The current version and last update display in the Version section of the Firmware
page.
Warning: Do not power off your drive during firmware installation. When
the installation is finished, your drive will automatically reboot.
Important: You can only update your device if the battery is more than 50
percent charged or the charger is plugged into a power outlet.
Viewing the Firmware Version
1. On the Dashboard, click Firmware on the Navigation bar.
2. In the Version area, the Current Version field identifies the firmware version
currently installed on your device. The Last Update
field identifies when the last
firmware update occurred.
Updating Firmware
My Passport Wireless Pro/My Passport Wireless SSD
User Manual
46