User Manual

1. Attach to your hard drive, the plastic tray that was included and designed for
the My Cloud Home Duo device.
▪ This plastic hard drive tray fits on the underside or circuit board side of the
hard drive.
▪ The end of the tray that is closed and has the latch, must be on the side of
the hard drive with the narrow serial number barcode label.
▪ As is illustrated above, gently
flex the plastic tray so that the tiny pins on the
insides of the tray go into the four holes on the sides of the hard drive. Make
sure the pins remain
firmly connected to the tray.
2. Once the tray is attached, slide the drive into the My Cloud Home Duo device.
▪ Orientation Note: The tray should slide in easily. Do not force it. The side of
the hard drive with the SATA connector and power connector, must point
down into the unit. The side of the hard drive with the small serial number
barcode label must face up. The latch must be on the side of the tray that is
closest to the rear panel of the unit.
▪ The drive is completely inserted once the plastic latch connects or latches
into the metal chassis of the unit.
3. Re-attach the top cover of the My Cloud Home Duo device.
▪ Note that one end has curved hinges that go in
first – then press down on
the other side of the lid until it is flush with the top of the My Cloud Home
Duo unit.
Additional Features & Functions
My Cloud Home / My Cloud Home Duo
User Manual
34