INSTALLATION MANUAL ALUMINUM & STEEL SADDLE/CROSS BOXES TRUCK STORAGE SOLUTIONS Rel ch Tag) ATTENTION; PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT. pq ULE TRY NOTICE Use specific aluminum unfit components when installing WEATHER GUARD® products to aluminum truck beds. Follow additional instructions if mounting to an aluminum truck bed.
READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSERTING A KEY INTO THE LOCKS This box has code-able locks installed. These locks have no per-set key code, and only the keys provided can be used to code the locks. These locks will “learn” the code, and only the code, of the first key that the lock is coded with (see CODING THE LOCKS below). One set of keys will be provided per box. If you have multiple boxes with code-able locks, you can: 1. Code each of the boxes with a single key.
TOOLS REQUIRED Ratchet Wrench 1/2" Ruler [HEEL Fender Washer (4) 3" Carriage Bolt (4) Nylon Lock Nut | ( Retaining Washer Mounting Clamp INSTALLATION INSTRUCTIONS Note: Note: Check clearance with cover open If the pickup is fitted with a plastic drop-in bed liner, it may need to be drilled, rimmed, or cut for proper installation of truck box. Truck box cover may not properly latch until box is fully bolted to truck bed in (4} places.
STEP 2 Attach Box to Truck Bed Attach mounting clamp, bolts, and washers as shown in figure to the right. Start with slot at drivers side front and work clock-wise until all four clamps have been installed. TRH SER BOUT UWE Lock System 8 The WEATHER GUARD® Extreme Protection™ Lock Lock is designed to provide maximum security, 8 Tum the key clockwise to the locked position while providing ease of use and as indicated on the lock bezel. years of reliable service.
12V Electrical Access WEATHER GUARD® Truck Boxes are equipped with a 12 volt electrical access grommet for easy electrical accessory fit-ups. To use, simply cut along one or more perforations in the rubber grommet and run wire through. Electrical Access Attachment Points Extension Cord Follow all Extension Cord manufacturer's wakings and Instructions. DO NOT insert extension cord through hole without grommet in pace.
LERNER CO. LIMITED LIFETIME WARRANTY FOR WEATHER GUARD® PROD WEATHER GUARD® Products Limited Lifetime Warranty LERNER CO. (the “Manufacturer”) warrants to the original purchaser only that WEATHER GUARD® Truck and Van Products (the “WEATHER GUARD® Product”) will be free from defects in material and workmanship from the date of purchase and continuing for the expected lifetime of the WEATHER GUARD® Product.