Product Manual

815 W 1800 N [phone]
Logan, UT 84321 USA www.weatherhawk.com
SKYMATE MANUAL Version 4.05
Open the case and click into the fully opened position OR, if
using a tri/unipod, click to 90-degree position and attach,
using the threaded fitting in the bottom of the case.
POWER ON by pressing the ON/OFF button momentarily.
POWER OFF by pressing and holding the ON/OFF button for
approx. 3 seconds.
AUTO POWER OFF: if the meter is inactive for approx. 5
minutes, it will automatically shut down to preserve the
battery.
OPERATING MODES:Turn the unit on using the ON/OFF
button on the left. Use the MODE button on the right to
scroll to the desired function. To turn off the unit, press and
hold the ON/OFF button for 3 seconds, until the display is
blank, then release.
CHANGING UNITS OF MEASURE: With the Skymate on,
change the units of measure by selecting the mode you wish
to change (Windspeed or Temperature). Next, press and
hold the ON/OFF button and, while holding, press the MODE
button to change the units of measure. When changing the
mode for windspeed, you will need to press the MODE key
repeatedly to scroll through options (MS, FPM, KNT, KMH,
MPH, BF (Beaufort). Release the ON/OFF and MODE buttons
when the desired unit is displayed.
NOTE: When you restart your Skymate, it will default to the
last mode and unit used.