User`s guide

Thermo Top Z / C_________________________________Land Rover
Exhaust duct
Place the cover (20/1) of the conduit
exhaust ports (20/2)
- Put the exhaust conduit (20/2) on the
heating, and secure it with a clamp,
as shown in Figure 20
- Attach the exhaust duct (20/2) with a cord
cable
-
Flue
CAUTION:
When assembling the flue, ensure that there
has a sufficient distance between the pipes and
cables! especially careful to maintain this
sufficient distance cables for vehicles
provided with an air conditioning system!
- Remove the securing bolt of the fairing wheel
- In space, attach the elbow (21/4)
the fairing wheel using the center hole,
as shown in Figure 21, using a screw
M6x20, a nut body and a collar nut
- Fasten the exhaust silencer (21/2) at room
angled (21/4) as shown in Figure 21, with
M6x20 screw and flange nut
- Put the exhaust conduit (21/1)
Heating of the muffler, and set
with a clamp
- Place the end of the exhaust duct (21/3)
exhaust silencer, attach a collar
tightening and towards the bottom, as shown in
Figures 21 and 22
- Make a hole diameter of 9 mm (22/1) in the
chassis as shown in Figure 22, and insert a
nut M6
- Attach the end of the exhaust duct (22/3) with
a clamp (22/2), a screw and a M6x20
spring washer for the nut (22/1)
- Align the end of the exhaust pipe as
shown in Figure 22
11