User`s guide

Thermo Top Z / C_________________________________Land Rover
Security system and relay
fan
Positioning the ends of the plate
Connection of the safety system (3/3) of
fan relay (3/1) and the ground terminal
on the mounting bracket as shown in Figure 3.
- Drill a bore of a diameter of 2.5 mm for the
security system, and a diameter of 4.0 mm
for the fan relay and backsplash.
- Fix the plate terminal system
security with metal screws 3,5 x13, and relay
fan and backsplash with metal screws
5.5 x9, 5
- Replace the security system on
connecting plate
- Connect the positive terminal of connector
the positive terminal of the starter
- Secure the wiring harness heating
the installation location of the
heating
- Secure the wiring harness from the clock
screening and flush with fan
cables available
- Set down the wiring harness from the pump
metering, along the cables located on the brake
headboard
TIP:
For all work on the cables, ensure
provide good protection against abrasion.
-
4