User`s guide

Thermo Top Z / C_________________________________Land Rover
Clock and preset option
setting summer / winter
CAUTION:
When mounting the clock preselection
not exert any pressure on the LCD screen.
TIP:
It is recommended to choose the location
presented to install the preset clock (6/2)
button and the summer / winter (6/1)! Please validate
installation location to your customers
before mounting.
- Place the template for the clock
Preset the desired location
- Operate two holes along the template
- Remove the template
- Fit the guide tube with sheet metal screws
TIP:
Pay attention to the direction of the ratchet teeth (see instructions
mounting)! When replacing the beam
electrical, pay attention to the protection against
friction!
- Run the wiring harness clock
screening through the aperture and securing the
lid
- Replace the clock screening
- Remove the baffle (6/3)
- Set the drilling of the summer / winter switch (6/1)
in the desired position and perform a bore
12 mm diameter
- Fix the summer / winter switch with washer
notched and a nut
- Connect the brown and purple connectors in
the switch as shown in Figure 7 (taken
bottom)
- Refit the baffle
6