Product Brochure

wedi Fundo Primo Product Information
These added values and its detail perfections eliminate the technical concerns in shower installations. However, this is not where wedi shower systems stop
offering its added values. The wedi Fundo shower system adds to your productivity and enables you to provide real value to your customers. Our wedi Fundo
Shower systems reduce the installation time for just the shower floor from a 2 – 3 day process (includes drying times) to only 30 minutes when compared to
traditional methods built with pre slope, vinyl liner and final mortar bed. wedi helps you to turn showers into service quicker, cleaner and safer. Especially
for our contractors, Fundo Primo helps to get to setting tile faster and on a much more consistent and tile friendly surface. Customers will appreciate the
“no noise and no dirt/dust“ installation. The wedi products do not contain harmful ingredients providing peace of mind to contractors and end users.
Caulking nut
Rubber caulking gasket
Fiber gasket
Drain body
wedi Fundo Primo unit
ABS to ABS seal with wedi Joint Sealant
Locking nut
Rubber gasket
2 in.
(50.8 mm)
Note for Installation
Optionally a glue drain can be obtained from wedi. For a cement glue connection, the floor pipe must be cut 2 1/4” below the surface of the subfloor.
Optionally a brass drain can be obtained from wedi. The installation proceeds as shown for the standard ABS drain provided with each Fundo Primo base.
Drain to Base Assembly
Note 2 in. outside diameter is nominal (2 3/8 in. for PVC/ABS schedule 40 pipe and 2 in. for cast iron/copper). Several Fundo Primo models naturally
feature different perimeter height or thickness at the edge. Therefore, pre-made standard notch connections of wedi curbs must be modified in
the field for a tight fit to the bases. Ramps and Extension panels can naturally not fit to all models and might be modified in the field as well.
The shower base may be extended using a pre-sloped wedi
extension panel.
wedi shower bases thicker than 1 ½ in. where an extension is con-
nected require a wedi building panel be placed under the extension
panel to adjust for a proper connection fit.
21