Product Brochure

Note for Installation
Optionally a glue drain can be obtained from wedi. For a cement glue connection, the floor pipe must be cut 2 7/8” (73.2 mm) below the surface of the
subfloor. Optionally a brass drain can be obtained from wedi. The installation proceeds as shown for the standard drain provided with each Fundo base.
wedi Fundo Ligno Product Information
wedi Fundo Ligno is designed to provide for a low profile base thickness of only 3/4” (19 mm). This allows for a fast and flush installation into a subfloor
assembly without cutting into floor joists. The system is designed to work without a curb. Enjoy the ease of installation without creating a structural
hazard because you maintain the structural subfloor panels installed between floor joists under the wedi Fundo Ligno. Due to barrier free showers
potentially being exposed to heavy point loads (e.g. wheel chair), you can confidently rely on the structural strength of the wedi Base and subfloor as
well as the wedi Fundo‘s traditionally≠–≠ strong cement based surface for ideal tile bond using any suitable cement based tile adhesives or grouts. As
applied to all wedi Fundo Shower Systems, wedi Fundo Ligno is designed to interlock and work with wedi Building Panels, wedi Joint Sealant, wedi
Fasteners, wedi Seats and Benches, wedi Niches and many more accessories, that truly complete your shower installation and waterproofing system.
The installation is fast, modular but customizable, and covered by wedi‘s full system warranty.
Note 2 in. outside diameter is nominal (2 3/8 in. for PVC/ABS schedule 40 pipe and 2 in. for cast iron/copper).
2 in.
(50.8 mm)
Caulking nut
Rubber caulking gasket
Drain body
wedi Fundo Ligno
Fiber gasket
Rubber gasket
ABS to ABS seal with wedi Joint Sealant
Locking nut
Drain to Base Assembly
The shower base may be extended using a pre-sloped wedi
extension panel.
27