Replacement Part List

wedi Shower Kit – Ligno

Full Shower System in a Box

All products needed to build a wedi walk-in point drain shower are included and provide a single manufacturer warranty.

Safe transportation in one box, easy estimating of product quantities needed. To address all challenges for tile professionals,

wedi engineered Fundo Ligno, a sloped shower base ¾” thin at its perimeter and available in various sizes. Fundo Ligno can be

field modified. The installation within a ¾” plywood structure requires no cutting into joists. Load-bearing plywood is simply

re-installed between floor joists and over wedi’s recess kit bracket system. This guarantees a full support and protection

of the tiled surface. The wedi typical strong cement based, reinforced surface is pre-sloped, directly tileable with large

or small format tile. The Fundo Ligno interlocks with wedi Building Panel used as waterproof backer board on walls as

well as on the surrounding floor. Optionally, wedi‘s Subliner Dry Sheet Waterproofing membrane can be used. Both

options offer a complete and professional system installation.

Screws and Washers

wedi Subliner Dry and Accessories

wedi Building Panel

Subliner Dry Flexi Collars for pipes and valves

wedi Fundo Ligno Shower Base

*Found in each kit:

 Fundo Ligno Shower Base (1)

 wedi 36 in. OR 48 in. x 60 in. x 1/2 in. Building Panels (5-6)

 wedi Fundo Kit Drain Standard (1)

 wedi Joint Sealant (8 10.5 oz tubes)

 wedi Sealant 620 (2 10.5 oz tubes)

 wedi Fastener Kit (1 screws/washers 100ct)

 wedi Corner Putty Knife (1)

 wedi Mixing Valve Flexi Collar (1)

 wedi Flexi Collar (1)

 wedi Subliner Dry Mat (1)

 wedi Subliner Dry Sealing Tape Outside Corner (2)