Product Brochure

13. Carefully turn the extension panel corner so its sloped side is up. Press the panel firmly into the thinset bed.

14. Finally, a continuous ½” bead of wedi joint sealant is applied over all surface connection joints and spread over the joints

using a putty knife.

15. Weights are applied equally over the shower floor to promote a firmer bond with the thinset mortar allowing you to

continue working on the shower walls immediately.

16. Option 1: The installation can now be completed using wedi Building Panel for walls and bathroom floor.

17. Option 2: The installation can now be completed using wedi Building Panel for walls and wedi curbs to separate the sloped

shower floor from the flat bathroom floor.

18. Option 3: The shower unit is ready for tiling. Please consider and plan for the tile cut and grout line design. The shower

base features slope fields that direct water to the drain from all sides, while the extension surface provides one sloped

direction. For tile size recommendations and other post installation considerations please review the applicable Primo,

Ligno, or Riolito Fundo Installation Manual, which applies to the extended shower floor area as well.